Asten Tekstil | Box Types

Standard Box – American Box

Standard box, all the lids are the same size. Outer doors in the middle of the box converge. The distance between the inner lids of the box aspect - ratio varies depending on. The packaging of many products. Better protection of the product in the base if desired, a suitable piece is placed on to measure the gap between the box lids. This method is especially produced and packaged many products from multiple waves in the box at the base of the box is used to eliminate the level difference.

Dual-Side Box Overlay

The difference from the standard box in all the tribes long held the cover of specified dimensions, is superimposed on top of the outer cover. Most of the space between the lids, which is another way to make this solution is economical in terms of production and usage, usually used as packaging of heavy products. Otherwise, for instance in the base of the box will not be parallel to the ground and creates the problem. Wire caps of this type usually are closed with stitches.

Clamshell Box Full

This type, which were put in the outer cover of the base key, the box, collapse resistant. On the face side is narrow and usually the best measure istiflenen boxes.

Based Beat Box

This box is one of the varieties which molded box, tape closed and locked with the upper and lower lids without the need for a specific sequence usually is evaluated as due to consumer packaging.

Telescopic Pan Type

Molded or manufactured as standard, these pans are shipped flat. After it is installed to the user by the company are adhered or sewn to the corners.

Octabi Cover

In the packaging of granular and powdered products are used. Octagonal tube-shaped raised side walls and an octagonal roof which is shaped on the bottom with this box due to the geometric design, very large loads can carry. Is moved with the pallet, the pallet is fixed to cemberlener. In the case of powdered products, a large gusseted plastic bags are used.

One-Piece Telescopic Box

Typically, automatic filling machines, closed box, for many purposes. To the meat of durable goods, so many products it packages. To stack on top resistant.

Pan Locked

Box is one of the varieties which molded the pan, as closed as it is used in conjunction with other types of automatic refill is not out of the question, in cases where exponentially established manually by the user, when used as a packaging extremely durable telescopic. Typically, bottle, jar, etc. the pan used for the products; ventilation and handhold locations by adding cherry etc. the fruits are used as packaging.

Automatic Refill Pan

This pan is one of the varieties which molded box, is used in the packaging of products such as soft drinks. The use of an economical type, which is quite common.

Types Of Boxes